+44 (0)20 8567 3924

Mon to Thur: 07:30am – 16:30pm

Friday - 07.30am – 13.30pm

Quick Enquiry!

Need a quick response?

If you need to get a quick response about any of our services,
use this form and we'll aim to respond within 24 hours.

Your Name

Your email

Your message

We aim to respond as quickly as possible.


Our Milling machines enable the manufacture of instrument gear boxes, motor plates, cover plates and housings. Our most challenging work is multi axis work on universal joints, yokes and splined couplings. 

Many of the components that Newmont make are part of an actuation mechanism. Milled features are often accurately timed to spline or gear teeth. Newmont has the expertise to measure the geometric and positional parameters between milled features and gears or splines.

The production of prismatic components is supported by three coordinate measuring machines (CMM) in our inspection department. Newmont has a well equipped tool room that is able to manufacture fixtures to locate and hold the most complex components.

Our machines are installed to high specifications that include high pressure coolant / through spindle coolant, thread milling and the facility for wireless data transfer from our database.

CNC programming can be done on the machines or off line using our CAM system (Edge/CAM).  

Take a look at the primary machinery we use in our Milling section:

CNC Milling Capacity Configuration
1 - Fadal VMC 3016 Vertical 30 x 16 x 20 inches 4 Axis. Vertical
2 - Fadal VMC 2216 Vertical 22 x 16 x 20 inches 4 Axis. Vertical
1 – Okuma Genos 460 30 x 18 x 18 inches 4 Axis. Vertical
1 – Hurco VM10 533 x 406 x 483mm 3 Axis. Vertical
1 – Haas VF1 508 x 406 x 508mm 4 Axis. Vertical
1 – Haas VF2 762 x 406 x 508mm 4 Axis. Vertical

Download the full primary plant machinery list